Researchers at Uppsala university, Sweden, and Element Six, U.K., have, for the first time ever, demonstrated electrical control of valley transport in 3-D dual-gate diamond field-eﬀect transistors. These results were published in Nano Letters.
Not many people are aware of it, but diamond is actually a wide-bandgap semiconductor with many extremely good properties, such as high thermal conductivity, high breakdown field, high carrier mobilities and chemical inertness. These properties, together with the possibility to synthesize high-purity, single-crystalline diamond make it a very interesting material and a candidate for use in power electronics. The low impurity concentration achieved when fabricating diamond, together with its rigid lattice, cause it to exhibit a uniquely low scattering rate, especially at low temperatures. For this reason, electrons tend to remain in a defined valley and it is then possible to observe valley-polarized electron ensembles, which we have previously proven to exist.
What is valleytronics?
Valleytronics is a concept for transporting information using the electron’s polarization state instead of its charge, as used in modern electronics. It has lately attracted considerable attention of the physics community and provides a new paradigm for storing and processing information in quantum-computing applications. Fast, scalable and direct electrical control of valley states without the use of strong external magnetic ﬁelds is crucial for achieving practical devices.
What did we achieve?
We have fabricated valley transistors on single-crystalline diamond plates with ultra-low nitrogen impurity concentrations. In order to gain a high degree of freedom of the control of the valley currents, we use a dual-gate conﬁguration. The control of location and time of the valley-polarized currents was achieved by adding multiple drain electrodes. By changing a gate bias voltage, it was possible to locally manipulate the charge states of nitrogen vacancy centers and allowed guiding valley-polarized currents. This means that at a precise time, we can control which type of electron goes to each contact. Outside the ﬁeld of topological transport in low-dimensional materials, electrical control of valley transport has previously never been accomplished experimentally.
These valleytronic devices enable electrostatic manipulation of valley currents and can be used to deliver electrons with a high degree of valley polarization for, e.g., electrical pumping of color centers in diamond for single-photon sources.
Nattakarn Suntornwipat et al., “A Valleytronic Diamond Transistor: Electrostatic Control of Valley Currents and Charge-State Manipulation of NV Centers”, Nano Letters 21, (1), 868-874 (2021), dx.doi.org/10.1021/acs.nanolett.0c04712
© 2021 Science X Network. All rights reserved.
Advent of the 3-D diamond valleytronic transistor (2021, February 19)
retrieved 19 February 2021
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.
This is a syndicated post. Read the original post at Source link .